 |
Da Vinci Firmware 1
Firmware for the DaVinci-M rocket avionics board.
|
|
Da Vinci Firmware 1
Firmware for the DaVinci-M rocket avionics board.
|
HAL configuration file. More...
#include "stm32h7xx_hal_rcc.h"#include "stm32h7xx_hal_gpio.h"#include "stm32h7xx_hal_dma.h"#include "stm32h7xx_hal_mdma.h"#include "stm32h7xx_hal_exti.h"#include "stm32h7xx_hal_cortex.h"#include "stm32h7xx_hal_adc.h"#include "stm32h7xx_hal_fdcan.h"#include "stm32h7xx_hal_flash.h"#include "stm32h7xx_hal_hsem.h"#include "stm32h7xx_hal_i2c.h"#include "stm32h7xx_hal_pwr.h"#include "stm32h7xx_hal_qspi.h"#include "stm32h7xx_hal_spi.h"#include "stm32h7xx_hal_tim.h"#include "stm32h7xx_hal_uart.h"#include "stm32h7xx_hal_pcd.h"
Go to the source code of this file.
Macros | |
| #define | HAL_MODULE_ENABLED |
| This is the list of modules to be used in the HAL driver. | |
| #define | HAL_ADC_MODULE_ENABLED |
| #define | HAL_FDCAN_MODULE_ENABLED |
| #define | HAL_QSPI_MODULE_ENABLED |
| #define | HAL_SPI_MODULE_ENABLED |
| #define | HAL_TIM_MODULE_ENABLED |
| #define | HAL_UART_MODULE_ENABLED |
| #define | HAL_PCD_MODULE_ENABLED |
| #define | HAL_GPIO_MODULE_ENABLED |
| #define | HAL_DMA_MODULE_ENABLED |
| #define | HAL_MDMA_MODULE_ENABLED |
| #define | HAL_RCC_MODULE_ENABLED |
| #define | HAL_FLASH_MODULE_ENABLED |
| #define | HAL_EXTI_MODULE_ENABLED |
| #define | HAL_PWR_MODULE_ENABLED |
| #define | HAL_I2C_MODULE_ENABLED |
| #define | HAL_CORTEX_MODULE_ENABLED |
| #define | HAL_HSEM_MODULE_ENABLED |
| #define | HSE_VALUE (16000000UL) |
| Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL). | |
| #define | HSE_STARTUP_TIMEOUT (100UL) |
| #define | CSI_VALUE (4000000UL) |
| Internal oscillator (CSI) default value. This value is the default CSI value after Reset. | |
| #define | HSI_VALUE (64000000UL) |
| Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). | |
| #define | LSE_VALUE (32768UL) |
| External Low Speed oscillator (LSE) value. This value is used by the UART, RTC HAL module to compute the system frequency. | |
| #define | LSE_STARTUP_TIMEOUT (5000UL) |
| #define | LSI_VALUE (32000UL) |
| #define | EXTERNAL_CLOCK_VALUE 12288000UL |
| External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad. | |
| #define | VDD_VALUE (3300UL) |
| This is the HAL system configuration section. | |
| #define | TICK_INT_PRIORITY (15UL) |
| #define | USE_RTOS 0 |
| #define | USE_SD_TRANSCEIVER 0U |
| #define | USE_SPI_CRC 0U |
| #define | USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ |
| #define | USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ |
| #define | USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ |
| #define | USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */ |
| #define | USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ |
| #define | USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ |
| #define | USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ |
| #define | USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ |
| #define | USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ |
| #define | USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ |
| #define | USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ |
| #define | USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ |
| #define | USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ |
| #define | USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */ |
| #define | USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ |
| #define | USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ |
| #define | USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ |
| #define | USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ |
| #define | USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ |
| #define | USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ |
| #define | USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ |
| #define | USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ |
| #define | USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ |
| #define | USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ |
| #define | USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ |
| #define | USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ |
| #define | USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ |
| #define | USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ |
| #define | USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ |
| #define | USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ |
| #define | USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ |
| #define | USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */ |
| #define | USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */ |
| #define | USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ |
| #define | USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ |
| #define | USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ |
| #define | USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ |
| #define | USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ |
| #define | USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ |
| #define | USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ |
| #define | USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ |
| #define | USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ |
| #define | USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ |
| #define | USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ |
| #define | USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ |
| #define | USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ |
| #define | USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ |
| #define | USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ |
| #define | ETH_TX_DESC_CNT 4U /* number of Ethernet Tx DMA descriptors */ |
| #define | ETH_RX_DESC_CNT 4U /* number of Ethernet Rx DMA descriptors */ |
| #define | ETH_MAC_ADDR0 (0x02UL) |
| #define | ETH_MAC_ADDR1 (0x00UL) |
| #define | ETH_MAC_ADDR2 (0x00UL) |
| #define | ETH_MAC_ADDR3 (0x00UL) |
| #define | ETH_MAC_ADDR4 (0x00UL) |
| #define | ETH_MAC_ADDR5 (0x00UL) |
| #define | assert_param(expr) ((void)0U) |
| Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code. | |
HAL configuration file.
Copyright (c) 2017 STMicroelectronics. All rights reserved.
This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.
Definition in file stm32h7xx_hal_conf.h.
| #define assert_param | ( | expr | ) | ((void)0U) |
Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.
Include module's header file
Definition at line 507 of file stm32h7xx_hal_conf.h.
| #define CSI_VALUE (4000000UL) |
Internal oscillator (CSI) default value. This value is the default CSI value after Reset.
Value of the Internal oscillator in Hz
Definition at line 121 of file stm32h7xx_hal_conf.h.
| #define ETH_MAC_ADDR0 (0x02UL) |
Definition at line 226 of file stm32h7xx_hal_conf.h.
| #define ETH_MAC_ADDR1 (0x00UL) |
Definition at line 227 of file stm32h7xx_hal_conf.h.
| #define ETH_MAC_ADDR2 (0x00UL) |
Definition at line 228 of file stm32h7xx_hal_conf.h.
| #define ETH_MAC_ADDR3 (0x00UL) |
Definition at line 229 of file stm32h7xx_hal_conf.h.
| #define ETH_MAC_ADDR4 (0x00UL) |
Definition at line 230 of file stm32h7xx_hal_conf.h.
| #define ETH_MAC_ADDR5 (0x00UL) |
Definition at line 231 of file stm32h7xx_hal_conf.h.
| #define ETH_RX_DESC_CNT 4U /* number of Ethernet Rx DMA descriptors */ |
Definition at line 224 of file stm32h7xx_hal_conf.h.
| #define ETH_TX_DESC_CNT 4U /* number of Ethernet Tx DMA descriptors */ |
Definition at line 223 of file stm32h7xx_hal_conf.h.
| #define EXTERNAL_CLOCK_VALUE 12288000UL |
External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad.
< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. Value of the External clock in Hz
Definition at line 157 of file stm32h7xx_hal_conf.h.
| #define HAL_ADC_MODULE_ENABLED |
Definition at line 37 of file stm32h7xx_hal_conf.h.
| #define HAL_CORTEX_MODULE_ENABLED |
Definition at line 99 of file stm32h7xx_hal_conf.h.
| #define HAL_DMA_MODULE_ENABLED |
Definition at line 92 of file stm32h7xx_hal_conf.h.
| #define HAL_EXTI_MODULE_ENABLED |
Definition at line 96 of file stm32h7xx_hal_conf.h.
| #define HAL_FDCAN_MODULE_ENABLED |
Definition at line 38 of file stm32h7xx_hal_conf.h.
| #define HAL_FLASH_MODULE_ENABLED |
Definition at line 95 of file stm32h7xx_hal_conf.h.
| #define HAL_GPIO_MODULE_ENABLED |
Definition at line 91 of file stm32h7xx_hal_conf.h.
| #define HAL_HSEM_MODULE_ENABLED |
Definition at line 100 of file stm32h7xx_hal_conf.h.
| #define HAL_I2C_MODULE_ENABLED |
Definition at line 98 of file stm32h7xx_hal_conf.h.
| #define HAL_MDMA_MODULE_ENABLED |
Definition at line 93 of file stm32h7xx_hal_conf.h.
| #define HAL_MODULE_ENABLED |
This is the list of modules to be used in the HAL driver.
Definition at line 35 of file stm32h7xx_hal_conf.h.
| #define HAL_PCD_MODULE_ENABLED |
Definition at line 83 of file stm32h7xx_hal_conf.h.
| #define HAL_PWR_MODULE_ENABLED |
Definition at line 97 of file stm32h7xx_hal_conf.h.
| #define HAL_QSPI_MODULE_ENABLED |
Definition at line 67 of file stm32h7xx_hal_conf.h.
| #define HAL_RCC_MODULE_ENABLED |
Definition at line 94 of file stm32h7xx_hal_conf.h.
| #define HAL_SPI_MODULE_ENABLED |
Definition at line 75 of file stm32h7xx_hal_conf.h.
| #define HAL_TIM_MODULE_ENABLED |
Definition at line 77 of file stm32h7xx_hal_conf.h.
| #define HAL_UART_MODULE_ENABLED |
Definition at line 78 of file stm32h7xx_hal_conf.h.
| #define HSE_STARTUP_TIMEOUT (100UL) |
Time out for HSE start up, in ms
Definition at line 113 of file stm32h7xx_hal_conf.h.
| #define HSE_VALUE (16000000UL) |
Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL).
Value of the External oscillator in Hz : FPGA case fixed to 60MHZ
Definition at line 109 of file stm32h7xx_hal_conf.h.
| #define HSI_VALUE (64000000UL) |
Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL).
Value of the Internal oscillator in Hz
Definition at line 130 of file stm32h7xx_hal_conf.h.
| #define LSE_STARTUP_TIMEOUT (5000UL) |
Time out for LSE start up, in ms
Definition at line 142 of file stm32h7xx_hal_conf.h.
| #define LSE_VALUE (32768UL) |
External Low Speed oscillator (LSE) value. This value is used by the UART, RTC HAL module to compute the system frequency.
Value of the External oscillator in Hz
Definition at line 138 of file stm32h7xx_hal_conf.h.
| #define LSI_VALUE (32000UL) |
LSI Typical Value in Hz
Definition at line 146 of file stm32h7xx_hal_conf.h.
| #define TICK_INT_PRIORITY (15UL) |
tick interrupt priority
Definition at line 168 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ |
Definition at line 173 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ |
Definition at line 174 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ |
Definition at line 175 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */ |
Definition at line 176 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ |
Definition at line 177 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ |
Definition at line 178 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ |
Definition at line 179 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ |
Definition at line 180 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ |
Definition at line 181 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ |
Definition at line 182 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ |
Definition at line 183 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ |
Definition at line 184 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ |
Definition at line 185 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */ |
Definition at line 186 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ |
Definition at line 193 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ |
Definition at line 191 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ |
Definition at line 192 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ |
Definition at line 194 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ |
Definition at line 195 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ |
Definition at line 196 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ |
Definition at line 197 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ |
Definition at line 198 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ |
Definition at line 199 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ |
Definition at line 200 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ |
Definition at line 201 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ |
Definition at line 202 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ |
Definition at line 187 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ |
Definition at line 188 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ |
Definition at line 203 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */ |
Definition at line 204 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */ |
Definition at line 205 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ |
Definition at line 206 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ |
Definition at line 207 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ |
Definition at line 208 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ |
Definition at line 209 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ |
Definition at line 210 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ |
Definition at line 211 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ |
Definition at line 189 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ |
Definition at line 212 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ |
Definition at line 214 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ |
Definition at line 213 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ |
Definition at line 215 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ |
Definition at line 190 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ |
Definition at line 216 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ |
Definition at line 217 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ |
Definition at line 218 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ |
Definition at line 219 of file stm32h7xx_hal_conf.h.
| #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ |
Definition at line 220 of file stm32h7xx_hal_conf.h.
| #define USE_RTOS 0 |
Definition at line 169 of file stm32h7xx_hal_conf.h.
| #define USE_SD_TRANSCEIVER 0U |
use uSD Transceiver
Definition at line 170 of file stm32h7xx_hal_conf.h.
| #define USE_SPI_CRC 0U |
use CRC in SPI
Definition at line 171 of file stm32h7xx_hal_conf.h.
| #define VDD_VALUE (3300UL) |
This is the HAL system configuration section.
Value of VDD in mv
Definition at line 167 of file stm32h7xx_hal_conf.h.
1.9.7